TABLE OF CONTENTS
Product Feature
Tilt Auto-alignment: Ensuring the cursor stays precise and will not be offset while drawing lines at any angle.
Reduced Pen Head Size: Minimizing obstruction while drawing.
Extremely Low Retraction Distance: The retraction distance refers to the distance that the pen nib retracts to the inside when pressure is applied from the minimum to the maximum. It has now been optimized to 0.4mm, eliminating nib wobbling during drawing.
Dual Pen Option: Kamvas Pro 19 and Kamvas Pro 27 come with two pens: PW600, featuring 3 side keys for better efficiency, and PW600S, with a slim body for reducing fatigue during prolonged use.
Tail Eraser: PW600 and PW600S of PenTech 4.0 include a tail eraser that is customizable for various functions.
Key advanced functions from PenTech 3.0 remain:
Optional Pen Nibs: Artists can choose between regular and felt nibs (for better friction).
Tilt Recognition: You can use tilt recognition in software that supports this function to imitate real strokes (such as pencils, brushes, etc.)
One is the PW600, a regular pen with a grip diameter of about 11.8mm. It features a dust-resistant silicone grip, 3 shortcut keys, and an eraser.
The other is the PW600S (Slim), with a pencil-like grip diameter of about 9.5mm, equipped with 2 shortcut keys and an eraser.
Kamvas Pro 19 includes a built-in 20° stand for convenient use. Additionally, the screen features a 75*75 VESA mount on the back. If you prefer alternative stands, here are our recommendations:
Here are the cable info:
USB-C to USB-C Full-featured cable: 1.8m
USB-C to USB-C PD Power Cable: 1.5m
3-in-2 Cable: 1.8m
Setup & Use
Yes, Kamvas Pro 19 is a drawing display. It requires a connection to a computer, laptop, or Android device to operate.
There are two methods to connect Kamvas Pro 19 to your PC/mac:
1. Use the full-featured USB-C to USB-C cable and power cable.
2. Connect via a 3-in-2 cable.
Kamvas Pro 19 comes with a 65W GaN PD power adapter capable of delivering 40W reverse charging. To power your laptop, connect the power cable and the GaN PD power adapter to the socket, then use the USB-C to USB-C full-featured cable to connect the Kamvas Pro 19 to your laptop.
Yes.
Yes, please ensure the full-featured USB-C to USB-C cable you purchased and the port of devices you want to connect support at least support USB3.1 GEN1 data transfer protocol and DP1.2.
To achieve a 10-bit display, you need to connect with a full-featured USB-C to USB-C cable.
The screen of Kamvas Pro 19 is made of anti-glare etched Canvas Glass, which is harder than the standard nib and felt nib. So, the nib will not damage the surface of your Kamvas Pro 19, and you do not have to put another film on its surface.
Please refer to this article to learn the step-by-step guide for adjusting screen resolution.
The buttons in the screen's upper right corner are the slide and power buttons. Their functions are:
Slide Button: Turn the touch input on or off.
Power Button: Short press to turn the screen on or off, and long press for 3 seconds to call the OSD menu.
Please refer to this article to learn the step-by-step method for adjusting the OSD menu.
The driver of Kamvas Pro 19 can auto-identify the pen you use on screen, and you can just set the functions you want in the driver. You can also manually choose the pen you want and set functions.
To control the switch, you can find a slide button on the upper side of the screen, which is the touch input switch.
Please follow the steps: click Edit—Preferences—Performance—check the Use Graphics Processor option (to enable multi-touch, please make sure to check the option). Check the attached image here.
Each pen display undergoes calibration before leaving the factory. We advise against manual cursor calibration. However, if needed, you can locate the "Monitor Calibration" button under the pen display - work area, in the driver settings. Click it and follow the steps to calibrate your screen.
The replacement nibs are in the pen holder. There are 5 standard nibs and 5 felt nibs. The pen nib clip is also built into the pen holder; you can use it to remove nibs.
- 3 Side Keys Standard Pen PW600
- Slim Pen PW600S
- Standard Nibs PN06
- Felt Nibs PN06F
- USB-C to USB-C Full-featured Cable
- Desktop Arm Stand ST500
- Adjustable Stand ST100/ST100A
- Palm Rejection Artist Glove
If you have already installed the Huion driver, you can check for updates in the settings. You can also download the firmware tool to update your product's latest firmware here.
Please refer to the articles below for step-by-step guidance.
Windows OS: How to Install Huion Drivers on Windows
Compatibility
The operating systems supported by Huion Kamvas Pro 19 include Windows 10 or later, macOS 10.12 or later, Android 6.0 or later, and Linux (Ubuntu 20.04 LTS).
Yes, Kamvas Pro 19 is compatible with a 75*75 VESA mount.