You can open and adjust the pen touch OSD menu on the screen by pressing the power button for 3 seconds.
Menu Overview
1. Top Navigation Bar:
(1) Signal Source
(2) Resolution + Refresh Rate
(3) Color Mode
2. Bottom Navigation Bar:
(1) Display Settings
(2) Color Temperature Settings
(3) Color Mode Settings
(4) Gamma Settings
(5) OSD Menu Settings
Display Settings
1. Presets
It supports Standard, Game, and Film preset modes. These presets can only be applied under the Native color mode, and within the preset menu, only saturation can be adjusted.
2. USER Mode
In this mode, you can adjust brightness, contrast, and saturation by dragging the sliders. However, under Native mode, only brightness can be adjusted.
In Native mode, all sliders can be freely adjusted.
In other color modes, only the brightness slider can be adjusted.
Color Temperature Settings
1. Presets
It supports 6500K, 7500K, and 9300K preset color temperature options, which can only be applied under the Native color mode. When a preset is selected, the R, G, and B sliders cannot be adjusted.
2. USER Mode
You can freely adjust the R, G, and B sliders to fine-tune the color temperature, but this is only available in Native and Black & White modes.
In Native and Black & White modes, the sliders can be freely adjusted.
In other color modes, the sliders cannot be adjusted.
Color Modes Settings
1. Native Mode
This mode fully reproduces the screen's original color gamut with high saturation. Most of the OSD menu content can be customized in this mode.
2. sRGB/Adobe RGB/Display P3/DCI-P3 Modes
These modes limit the color gamut to the corresponding color spaces. Since these modes conform to specific standards, adjustments to Gamma, color temperature, contrast, and saturation are not available. Only brightness can be adjusted.
3. Black & White Mode
The display turns black and white. In this mode, you can adjust Gamma, brightness, and color temperature.
4. USER Mode
In this mode, you can use the G1 color calibration tool to calibrate the display colors. The calibration data will be saved within this mode and will not affect other color modes. For specific calibration instructions, please refer to the provided link.
Gamma
You can set different Gamma curves under Native and Black & White modes to achieve different dark-light contrast effects.
In Native mode, the sliders can be freely adjusted.
In other color modes, the sliders cannot be adjusted.
OSD Menu Settings
1. Signal Source: You can choose the signal source to be USB-C, HDMI, or DP.
2. Display Ratio: You can set the display ratio to Full Screen or 4:3.
3. Reset (Red icon): It allows you to reset all OSD menu settings to their default values.
