Bottom Dial Issue

Y Zee

がトピックを開始しました 7か月前

I just got my new Pen Display (Huion Kamvas 13 Gen 3) on July 1st, but I'm already having an issue with the bottom dial wheel. It feels jumpy and not smooth at all. How can I fix this problem?

O

Orliza Amodia
はこう言いました： 7か月前
Hi, Y Zee. I'm sorry about the issue you're experiencing with your Kamvas 13 (Gen 3)'s bottom dial. To resolve your dial issue, please follow these steps:
1. Apply some alcohol to the dial and turn it clockwise and counterclockwise for several seconds. You can watch this video for guidance: Dial Fix.
2. If the issue persists, please update your tablet's firmware. You can download the firmware and find the corresponding instructions using this link: Kamvas 13 (Gen 3) Firmware Update.
Please email the following to service@huion.com if the steps above do not resolve your issue:
- Order number
- Serial number (found on the back of your tablet, which starts with S/N)
- Your computer operating system and its version
- The driver version you installed on your computer
- The drawing programs you use and their versions
- Details of your issue and the steps you've done. We would appreciate it if you could provide a video as well. You can upload it to Google Drive, Dropbox, OneDrive, iCloud, or other online storages, remove the restriction, and share the unrestricted link with us.
Best Regards,
HUION Customer Support
C

Cosmos K.
はこう言いました： 2か月前

I am having the same issue as well, but whenever I plug the tablet in to attempt the firmware update, the tool from the Google Drive link states the device was disconnected.
O

Orliza Amodia
はこう言いました： 2か月前
Hi, Cosmos K.. Kindly try the applicable firmware update from the links below:
- Kamvas 13 (Gen 3) Firmware Update for Mac
- Kamvas 13 (Gen 3) Firmware Update for Windows
NOTE: Please ensure your tablet is the "Gen 3" version. If you're not sure, please email our support team at service@huion.com and provide the necessary information outlined previously.
Best Regards,
HUION Customer Support
T

Tung Hoang
はこう言いました： 14日前

Hello Huion team,
After using kamvas 13 gen 3 firmware update for Mac to resolve the dials issue but now my Huion kv 13 gen 3 can no longer connect to my MacBook, the Huion driver show "No device connected"
I tried reinstall the Huion driver and and check the cable but nothing work
Please help me
N

Nóra Köblös
はこう言いました： 13日前

I'm having the same issue as the previous person, but the firmware updates provided are both for Mac. Could you provide the files for Windows?
O

Orliza Amodia
はこう言いました： 11日前
Hi, Tung Hoang. I'm sorry about that. Was the firmware update successful? If it was, please try the steps on this article: What To Do When the Huion Driver Shows Device Disconnected or No Devices Connected?
On the other hand, if it wasn't successful, please email the following to service@huion.com so that we can provide you with some steps to resolve it:
1. Your MacOS version
2. Tablet driver version you installed
3. Your tablet's serial number (found on the back of your tablet, which starts with S/N)
4. Your tablet's firmware version
5. Link to a short video as you perform the firmware update on your Mac computer. Please ensure that the link is unrestricted so that we can access it easily.
Best Regards,
HUION Customer Support
O

Orliza Amodia
はこう言いました： 11日前
Hi, Nóra Köblös. Have you tried the steps in the article above? Do you also have a Kamvas 13 (Gen 3)? The links I previously shared were specific for the Kamvas 13 (Gen 3). You can use this link for Windows: Kamvas 13 (Gen 3) Firmware Update for Windows.
If you have a different tablet model, please do not update the firmware using the links I previously shared. Instead, please email the following to service@huion.com so we can assist you better:
1. Serial #
2. Driver version
3. Firmware version
4. Windows OS version
Best Regards,
HUION Customer Support
V

Veramonserrath983
はこう言いました： 2日前

Hello, I'm having the same problem with the upper dial. Do you have the firmware for the Kamvas 16 (Gen 3)?
O

Orliza Amodia
はこう言いました： 2日前
Hi, Veramonserrath983. Kindly refer to the links below for the Kamvas 16 (Gen 3) firmware update files:
- Kamvas 16 (Gen 3) firmware update for Windows
- Kamvas 16 (Gen 3) firmware update for Mac
Best Regards,
HUION Customer Support

ログインまたは登録　コメント投稿のため